Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterAutomatic Gate Repair in Jacksonville, FL
Automatic gate repair in Jacksonville typically costs between $180 and $650, with most common fixes like limit switch adjustments or sensor realignment running $180 to $300, and motor replacements reaching $450 to $650. We’re Latch and Post Gate Repair services Jacksonville, part of the Cedarwell family of independently owned gate specialists, and we’ve repaired electric and automatic gates for Jacksonville homeowners since 2009. When your gate starts acting up, call (904) 250-0188 and a live person answers, day or night.
Every automatic gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on, whether you need Gate Repair in Jacksonville for a simple hinge fix or a full motor replacement.
We see automatic gates throughout Jacksonville’s older neighborhoods all the time: Avondale driveways with FAAC swing arms that have weathered two decades of salt air, Mandarin properties with Linear operators that fight rust from summer humidity, and San Marco homes where original BFT motors finally give out after years of daily use. Our technicians are factory-trained on the brands families actually own, so the right fix happens on the first visit.
When You Need Automatic Gate Repair
Most homeowners call us when the gate still works, but not the way it should-often a sign they need Gate Realignment or similar service. Here are the specific signs we hear about most often around Jacksonville:
- The gate opens halfway and stops. In Riverside and Ortega, we routinely find the limit switches knocked out of position by the same daily temperature swings that warp wooden fence gates. This is usually a $180 to $240 fix.
- The gate reverses after closing. Safety sensors get misaligned when posts shift in sandy soil, which is common in Jacksonville Beach and Ponte Vedra. Realigning them often takes under an hour.
- The motor hums but nothing moves. That hum usually points to a capacitor or gear problem. On Viking and FAAC units, we diagnose and quote this before touching a single part.
- The gate opens on its own at random. In neighborhoods near the St. Johns River, radio interference from boat docks and marina equipment can trigger ghost openings. We re-code the receiver and change the frequency when possible.
- The remote works from 10 feet but not 30. This is often a failing receiver board or a low-voltage wiring issue. We test voltage at the board rather than guessing.
- The gate slams shut instead of closing gently. Worn hydraulic pistons on FAAC and BFT swing gates show up after years of direct sun exposure. We replace pistons and seals before the gate damages the post.
If any of this sounds familiar, call (904) 250-0188. We’ll talk through what you’re seeing and give you an honest read on whether it’s urgent or can wait a few days.
Our Automatic Gate Repair Process
Here’s exactly what happens when you call Latch and Post Gate Repair Jacksonville for an automatic gate problem:
- You call and a live person answers. No voicemail tree, no callback queue. We ask what the gate is doing, what brand it is, and when it started. If you’re not sure of the model, we can usually identify it from a photo you text over.
- We schedule your visit and confirm the details. You’ll know who’s coming, when they’ll arrive, and what to expect. If quiet hours matter, we can schedule around nap time.
- The technician arrives with the right parts for your brand. Our trucks carry common components for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite. We don’t do the “come back next week once the part ships” routine for most repairs.
- You get a written price before any work begins. No surprises, no pressure. The number you see is the number you pay, and you decide before we turn a single screw.
- We repair, test, and clean up. We run the gate through full open and close cycles, check safety sensors, and test every remote and keypad. Before we leave, the technician puts down shoe covers and drop cloths where needed, and we show you a photo of the cleanup.
Every step is backed by the 365-Day Done Right Promise. If the repair isn’t right, we make it right, no argument, no fine print.
Automatic Gate Repair Pricing in Jacksonville
Most automatic gate repairs in Jacksonville fall into predictable ranges, and you’ll see the exact number in writing before we touch anything-check our How Much Does Gate Repair Cost? (2026 Price Guide) - Jacksonville, FL for typical ranges. Here’s what we typically see across the city:
- Sensor realignment or cleaning: $90 to $140. This fixes ghost openings and gates that reverse unexpectedly.
- Limit switch adjustment: $120 to $180. Common on FAAC and Linear swing gates in Riverside and Avondale.
- Remote or keypad reprogramming: $75 to $120. We re-code existing remotes and walk you through adding new ones.
- Capacitor replacement: $150 to $220. The fix when the motor hums but the gate won’t move.
- Receiver board replacement: $180 to $300, depending on brand. Viking and BFT boards cost more than entry-level models.
- Motor replacement: $450 to $650 for most residential gates. We quote the specific motor for your brand before ordering.
- Full diagnostic visit: $75, credited toward the repair if you proceed.
Several things affect your final price: the age of your system, whether parts are still manufactured for your model, the length of wiring runs from the house to the gate, and whether your gate is on the water (salt air corrodes contacts faster in Jacksonville Beach and Atlantic Beach). We factor all of this into the written quote, so you’re never surprised.
Need a straight answer on cost? Call (904) 250-0188, describe the symptom, and we’ll give you a realistic range before we ever schedule the visit.
FAQs – Automatic Gate Repair
How much does automatic gate repair cost in Jacksonville?
Automatic gate repair in Jacksonville ranges from $90 for a simple sensor cleaning to $650 for a full motor replacement, with most repairs landing between $150 and $300. See How Much Does Gate Repair Cost in Jacksonville, FL? (2026 Price Guide) for full details. You’ll get a written price before any work starts, so there’s never a surprise line item. Call (904) 250-0188 and describe what your gate is doing, and we’ll narrow the range for your specific brand and symptom.
Can you fix my automatic gate the same day?
For common issues like sensor misalignment, limit switch adjustments, and remote reprogramming, we can usually complete the repair the same day we arrive. Motor replacements may require a part order, though we stock the most common Viking, FAAC, BFT, and Linear components on our trucks. Call (904) 250-0188 and tell us the brand and symptom, and we’ll tell you straight whether it’s a same-day fix or needs a follow-up visit.
Is it cheaper to repair or replace an automatic gate system?
For gates under 15 years old with a working motor and solid posts, repair is almost always cheaper, often by $1,000 or more versus a full replacement. We recommend replacement when the motor fails on a gate older than 20 years and the post is also deteriorating, since patching both pieces rarely holds. We’ll give you both numbers in writing and let you decide, with no pressure either way.
What brands of automatic gate openers do you repair in Jacksonville?
We repair LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule automatic gate systems throughout Jacksonville. Our technicians are factory-trained on these brands, which means the right diagnostic happens on the first visit instead of the second or third. If you’re not sure what brand you have, call (904) 250-0188 and we’ll help you identify it from a photo.
Can you come today if my gate is stuck open?
Yes, call (904) 250-0188 and a live person answers 24/7. If your gate is stuck open and you need it closed tonight for pets or kids, we prioritize emergency calls and will tell you an honest arrival window when you call. No voicemail, no callback queue, just a person on the line who can schedule dispatch.
Why Jacksonville Homeowners Call Us First
Automatic gates live outside, and Jacksonville’s climate works against them constantly: nine months of humidity, afternoon thunderstorms that cycle power during summer, and salt air that eats away at exposed wiring within a few miles of the coast. We’ve repaired gates in every corner of the city, from Murray Hill bungalows with tight driveway clearances to Nocatee properties with long runs and heavy ornamental iron.
When we work on your gate, we name what we’ll protect inside the home. We lay drop cloths on the floor and put on shoe covers before we step inside your house to access the control panel. We choose pet-safe lubricants where there’s a choice, because we know your dog walks through the gate opening every day. And we can schedule around nap time if quiet matters, because half the gates we repair belong to families with small kids.
Every Latch and Post technician works under the Cedarwell C.A.R.E. values: Clean up like it’s our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, and Explain the price before the work. These aren’t upsells; they’re included on every visit, no matter how small the repair.
If you need automatic gate repair in Jacksonville, start with a call to (904) 250-0188. We’ll ask what the gate is doing, give you an honest read on cost, and schedule a visit that works around your family’s day. And if the repair isn’t right, the 365-Day Done Right Promise means we come back and make it right, no argument, no fine print.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Jacksonville, serving Jacksonville.