Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterGate Realignment in Jacksonville, FL
A gate that drags, sticks, or won’t latch is usually a realignment issue – the hinges have shifted, the post has settled, or the gate leaf has sagged out of square. Gate realignment in Jacksonville typically costs between $150 and $450 depending on gate size, post condition, and whether new hardware is needed. Most realignments take one to two hours, and we always hand you a written price before any tools come off the truck. Call (904) 250-0188 and a live person will answer, any hour, any day.
At Latch and Post Gate Repair Jacksonville, we focus on one thing: gates. That’s the Gate Repair in Jacksonville work we’ve done since 2009 as part of the Cedarwell family of independently owned and operated gate specialists. Realignment is one of the most common fixes we do, and it’s also one where a small correction today prevents a much larger job six months from now.
Why Gates Go Out of Alignment in Jacksonville
Jacksonville’s soil is the usual culprit. We have sandy, fast-draining soil in areas like Mandarin and the Beaches, and dense clay closer to the St. Johns River. Both move with rain and drought seasons. When the post shifts even half an inch, the gate leaf tilts, the latch misses the strike plate, and every opening grinds the problem deeper. Add in summer humidity swelling wood gates or salt air accelerating hinge wear east of the Intracoastal, and a gate that was square in January can be dragging by August. That’s where our Gate Repair services come in.
We also see alignment problems crop up after storms. A hard wind gusts against a solid gate panel and flexes the hinges. Over time, that flex becomes permanent sag. Driveway gates on FAAC and BFT operators are especially sensitive because the automated arm pushes against whatever misalignment exists, compounding the wear on the motor and gearbox.
When You Need Gate Realignment
Here are the signs we hear about most often from homeowners across Jacksonville, from Riverside to Ponte Vedra:
- The gate scrapes the ground or the concrete pad. You’ll see a curved wear mark where the bottom rail used to clear. This means the gate leaf has sagged, usually from hinge wear or post movement.
- The latch won’t catch. You lift, you push, you wiggle – and the latch either misses the strike plate or only catches at a specific angle. That’s a misaligned gate, not a broken latch, in most cases.
- The gate drifts open or closed on its own. A gate that swings by itself either has an out-of-plumb post or an unlevel hinge line. On sloped yards in neighborhoods like San Marco or Ortega, this is common.
- The gate rubs against a post or column. You’ll hear a creak or see bare metal or worn wood where the gate edge contacts the static post.
- An electric gate stops mid-cycle or reverses. Viking and Linear operators read the added resistance of a misaligned gate as an obstruction, which causes phantom stops and reversals.
- You notice the hinge gap widening at the top or bottom. Stand back and look at the gap between the gate and the post. If it’s wider at the top than the bottom, the gate has dropped.
Any one of these is worth addressing now rather than waiting until the gate won’t open at all, especially if you have kids or pets who rely on the gate to stay where it should.
Our Gate Realignment Process
Every gate comes down to two parts – the latch that holds it and the post that carries it. That’s the job we focus on. Here’s how a realignment visit works with us:
- We inspect the full gate system. Hinges, post plumb, gate square, latch alignment, and operator settings if it’s an automated gate. We check the grade underneath and the soil around the post.
- We show you what we found and write down a price. Before any work starts, you get a written price. No pressure, no surprise line items. If the fix is simple, we say so. If the post itself needs resetting, we walk you through what that involves and what it costs.
- We correct the alignment. This may mean tightening and shimming hinges, adjusting the latch strike, resetting a shifted post in concrete, or adjusting the operator limits on a FAAC, BFT, Linear, or Viking system so the gate travels cleanly through its full range.
- We test repeatedly. Open, close, latch, release. We run automated gates through several full cycles and check that the operator is not laboring or erroring.
- We clean up and photograph it. We lay drop cloths on the floor and put on shoe covers before we step inside. We choose quiet tools when kids are asleep. Before we leave, we take a photo of the cleaned-up work area – it’s part of the Cedarwell C.A.R.E. routine: Clean up like it is our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, Explain the price before the work.
Gate Realignment Pricing in Jacksonville
What you’ll pay depends on the gate’s size, how far out of square it is, and whether we’re fixing hardware or resetting the post itself. See How Much Does Gate Repair Cost in Jacksonville, FL? (2026 Price Guide) for full details. Here’s a realistic breakdown for the Jacksonville market:
- Minor hinge tightening and latch adjustment: $150 – $250. This covers small alignment corrections on single walk gates where the hinges are still solid and the post is sound.
- Standard gate realignment with hinge replacement: $225 – $400. Common on heavier gates or those with worn hinge barrels. We replace the hardware, re-square the leaf, and adjust the latch.
- Post reset or reinforcement: $350 – $600 or more. When the post has shifted in the ground, we may need to dig, re-set, and re-concrete it. This is a bigger job, and the exact price depends on soil conditions and post size – in sandy Mandarin soil it’s often a quicker dig than in clay-rich ground near the river.
- Automated gate realignment with operator adjustment: $250 – $500. Includes re-squaring the gate and reprogramming travel limits on the operator so the gate opens and closes without strain.
We never give a number over the phone and then change it on site. You’ll see the exact price in writing before we touch anything. Estimates are free, and our 365-Day Done Right Promise covers every realignment: if it’s not done right, we make it right – no argument, no fine print. Wondering How Much Does Gate Repair Cost? (2026 Price Guide) - Jacksonville, FL residents can expect? We’ll spell it out upfront.
To schedule or ask about your specific gate, call (904) 250-0188 and a live person – not a voicemail – will answer, 24 hours a day, 7 days a week.
FAQs – Gate Realignment
How much does gate realignment cost in Jacksonville?
Gate realignment in Jacksonville generally costs between $150 and $450, with post resets running $350 to $600 or more depending on soil and post condition. You’ll receive a written price before any work begins, every visit. Call (904) 250-0188 for a free estimate specific to your gate.
Can you realign my gate the same day in Jacksonville?
In most cases, yes. A standard gate realignment takes one to two hours, and we commonly complete same-day service for walk gates and driveway gates with minor sag or hinge wear. If the post requires resetting in concrete, that may need a second visit to allow proper curing. Call (904) 250-0188 and our live dispatcher will let you know what today looks like.
Is it cheaper to realign or replace my gate?
Realignment is almost always the cheaper option when the gate leaf, hinges, and post are structurally intact. A realignment runs $150 to $450 in most Jacksonville cases, while a full gate replacement with new hardware typically starts at $800 and goes up quickly with size and material. If your post is rotted, rusted through, or the gate frame is bent, replacement may be the more honest long-term fix, and we’ll tell you that plainly. Call (904) 250-0188 for an in-person assessment.
Do you work on automated driveway gates that need realignment?
Yes. We’re factory-trained on FAAC, BFT, Linear, and Viking operators, and we handle gate realignment on both manual and automated driveway gates throughout Jacksonville. Misalignment on an automated gate causes extra strain on the operator, so correcting the gate geometry often extends the life of the motor and gearbox. Call (904) 250-0188 to schedule a visit – estimates are free.
Why Jacksonville Homeowners Call Latch and Post for Realignment
Because we treat your home the way we’d want ours treated. Shoe covers and drop cloths on every visit, so your floors stay clean while we move between the gate and the operator panel. Quiet tools when we can, especially if someone’s napping. A technician who asks before moving anything in your yard or garage. These aren’t upsells – they’re how every visit works, every time.
We also answer the phone. A live person picks up at (904) 250-0188 around the clock, whether it’s noon on a Tuesday or 3 a.m. on Thanksgiving. The techs are background-checked and uniformed, trained specifically on the gate brands families in Jacksonville actually own. Not general handymen. Gate people.
If your gate is sagging, scraping, or refusing to latch, call us at (904) 250-0188 for a free estimate. We’ll give you a straight answer and a written price before any work begins. From the home to the gate at the end of the driveway, Latch and Post Gate Repair Jacksonville is here to keep things working right.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Jacksonville, serving Jacksonville. Looking for Gate Repair Near Me in Jacksonville, FL? We’re local.