Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Electric Gate Repair for Jacksonville Homeowners
When your electric gate won’t open, or worse, won’t close, the problem is rarely the gate itself. It’s usually the opener, the motor, or a component inside the operator housing. Our team at Latch and Post Gate Repair Jacksonville has been fixing these systems since 2009, and we take the same care with your property that we’d take with our own. Cody Beckman, who leads our Jacksonville crew, makes sure every technician carries the Cedarwell C.A.R.E. values to every job: a written price before work starts, shoe covers and drop cloths inside the home, and a photo of the cleanup before we leave. For a free estimate or same-day service in Jacksonville, call (904) 250-0188.
Key Takeaways
- Most electric gate failures in Jacksonville come down to a bad motor, a worn gear, or a failed capacitor, not the gate itself.
- A written price is provided before any work begins, every single visit, with no pressure to accept.
- Every repair and installation is covered by the 365-Day Done Right Promise: if it’s not right, we make it right.
- We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
- Calls are answered by a live person 24 hours a day, 7 days a week, including holidays.
Styles & brands we work with
Gate Opener Repair
Gate Opener Repair is what we do most often. It means diagnosing and fixing the motorized arm, swing arm, or slide operator that physically moves your gate. When the opener stops responding, makes a grinding noise, or only moves halfway, the cause is usually a worn gear, a failed capacitor, or a control board that lost its programming. In Jacksonville, the humidity accelerates corrosion on circuit boards and wire connections, something we see constantly in Riverside, San Marco, and Ortega. Most Electric Gate Repair in Jacksonville run between $180 and $450 depending on the part and the extent of the damage. You’ll see the exact number in writing before we touch anything.
Openers That Move Slowly
A gate that creeps open or barely makes it forward usually has a failing motor or a drive mechanism full of rust and debris. We open the operator housing, clean the drive assembly, and test the motor draw with a clamp meter to see whether it’s pulling more amperage than the manufacturer allows. If it is, the motor is failing and should be replaced before it leaves your gate stuck halfway open at 6:45 on a Tuesday morning.
Openers That Stop Responding
When the gate won’t respond to the remote, the keypad, or the hardwired button, the issue is often a dead main control board. We carry replacement boards for LiftMaster, FAAC, and Linear units, and we program them on-site so you’re not waiting on a second trip. Latch and Post repair work includes testing every input and output, not just swapping the board and hoping for the best.
Automatic Gate Repair
Automatic Gate Repair covers the broader system that opens and closes your gate without you leaving the car. That includes the opener, the safety sensors, the receiver, the keypad, the wiring, and the gate hardware itself. When any one of those pieces fails, the whole system stops working. A typical Electric Gate Repair - Orange Park costs between $150 and $600 depending on whether we’re replacing a sensor, rewiring a run, or rebuilding a hinge that put stress on the operator. Every estimate includes a written breakdown of the price before work begins.
Safety Sensor Pairing Problems
When your gate refuses to close, stops and reverses, or only moves while you hold the button, the safety edge or photo-eye sensors are usually involved. We test each sensor with the manufacturer’s diagnostic mode, clean the lenses, and check the wire runs for pinhole breaks caused by Jacksonville’s sandy soil and seasonal rain. Chasing a broken wire through conduit is half the job, and we take the time to find it rather than bypassing it.
Remote and Receiver Range Drops
If your gate only opens when you’re twenty feet away or the remote has to be aimed perfectly at the receiver, you likely have a weak antenna connection or a receiver going bad. We test the receiver output directly and replace the antenna wire or the whole receiver board as needed. This is a repair we finish in under an hour on most Jacksonville visits.n
Electric Gate Motor
An Electric Gate Motor is the muscle of your system. It converts electrical current into the torque that swings or slides an iron or steel gate, and it works harder in Jacksonville than most places because of the heat, the salt air near the St. Johns River and Atlantic coast, and the number of times per day a family gate cycles. When a motor fails, you’ll usually hear it before you see it: a loud hum with no movement, a grinding gear, or a complete silence when you press the button. Motor replacement in Jacksonville typically runs $400 to $1,200 depending on the gate’s size and the motor type. We quote the full price, labor included, before we order any parts.
Swing Gate Motor Replacement
Swing gates put rotational stress on motor shafts and pistons, especially when the wind off the Intracoastal catches a solid panel and shoves against the operator. We spec replacement motors by duty cycle, not just size, so a family gate that cycles 40 times a day gets a motor rated for continuous use. The old motor comes out carefully, and the new one gets a fresh capacitor and clean wiring connections.
Slide Gate Motor Failure Signs
Slide gates in Jacksonville’s commercial and larger residential properties hide their problems until the gate binds mid-run. If you hear a screech, see the gate jerk, or notice the limit switches are out of position, the motor is likely working against a damaged rail or wheel. We check the full track before touching the motor so a new motor doesn’t inherit the same problem that killed the old one.
Gate Access Control
Gate Access Control is the system that decides who gets in: keypads, intercoms, card readers, telephone entry systems, and vehicle detection loops. When the access control fails, your gate may work fine mechanically but won’t respond to any entry method, or it responds to everything, which is worse. In Jacksonville, we repair and replace access control from DoorKing, Viking, and Elite, and costs typically range from $250 for a keypad replacement to $1,800 for a full telephone-entry system with a directory. The written quote covers everything, including wiring, programming, and cleanup.
Keypad and Intercom Upgrades
A keypad that worked for five years and suddenly doesn’t often has a failing membrane or water intrusion through the gasket, especially after a Jacksonville summer storm. We replace the pad or the whole keypad unit, re-pin codes, and test every button before we leave. For intercom systems, we check the transformer, the speaker, and the call button separately so you’re not replacing an entire panel for a bad speaker wire.
Telephone Entry and Visitor Systems
Telephone entry systems let you open the gate from inside the house when a visitor calls. When the call drops, the line hums, or the gate won’t trigger from the phone, the problem is usually the relay or the line itself, not the gate operator. We isolate the relay with a multimeter and test the phone line with a handset, then replace only the failed part. Families in Neptune Beach and Jacksonville Beach use these systems heavily, and our Electric Gate Repair in Fleming Island covers all the major brands.
Commercial Gate Operator
A Commercial Gate Operator is built for gates that cycle hundreds of times per day, and when one fails, it stops employees, deliveries, and customers. We work on commercial swing and slide operators from FAAC, BFT, LiftMaster, and Viking across Jacksonville’s industrial corridors and apartment communities. Commercial operator repair in Jacksonville typically costs $600 to $2,200 depending on the unit, the age, and the condition of the gate hardware. The price includes the written estimate, the repair, and the cleanup photo, same as every residential job we do.
High-Cycle Operator Rebuilds
Gates at warehouses and apartment complexes in Jacksonville’s Westside and near the port cycle more times in a week than a residential gate does in a year. We rebuild these operators by replacing the belt, the gear, the clutch, and the capacitor in one visit, then we run a cycle test and log the results for your maintenance records. This is faster and cheaper than replacing a whole unit when the frame and rail are still in good shape.
Operator and Gate Hardware Alignment
A commercial operator that struggles, smokes, or trips its breaker is often fighting a gate that’s out of alignment, off its rail, or sagging on a worn hinge. We check the gate movement by hand with the operator disengaged, measure the roll clearance, and adjust the wheels, guides, and hinges before we power the operator back up. That’s the difference between a repair that lasts and one that fails again in six months.
Brands We Service
We’re factory-trained on the brands Jacksonville homeowners and businesses actually own. LiftMaster accounts for a good share of our residential gate opener work, and we stock common OEM control boards, remotes, and receiver parts so most LiftMaster repairs finish in one visit. FAAC units are popular on high-end and larger properties, and we know their hydraulic and electromechanical operators well enough to diagnose motor pressure issues without guessing. BFT and Linear operators appear on a lot of Jacksonville’s mid-size gates, and we carry the capacitors, boards, and transmitters that keep them running.
For gate access control, we service DoorKing, Viking, and Elite systems, including telephone entry and card readers. For rural properties and long driveways around Callahan and Middleburg, our Electric Gate Repair in Callahan covers Ghost Controls and Mighty Mule, which are common choices, and we stock their remotes and control boards. Whether you have one of these brands or something else entirely, we’ll tell you honestly if the unit is worth repairing or if replacement is the better call.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The gate won’t close all the way. A gate that stops six inches short leaves a gap a dog can walk through or a child can slip past. The cause is usually a limit switch or safety sensor, and both are repairable same-day in Jacksonville.
- The operator hums but nothing moves. A hum with no movement means the motor is getting power but the drive train is not engaged. That’s often a broken gear or a failed clutch, and running it like that burns up the motor. We come out, diagnose it, and give you a written price before anyone touches a tool.
- The gate reverses for no reason. If your gate starts reversing mid-run or refuses to stay closed, a safety edge, loop detector, or photo-eye is likely failing. This is more than an annoyance; it leaves your property open when you think it’s secure.
- The keypad accepts your code but nothing happens. A keypad that beeps but doesn’t open the gate points to a relay or wiring problem between the keypad and the operator. It’s a repair we handle in one visit, usually under an hour.
- You hear grinding or squealing when the gate moves. Metal-on-metal noise means a bearing, a wheel, or a drive gear is worn and putting extra load on the motor. Ignoring the sound chews through parts that are cheaper to replace now than in three months.
Our Process, Step by Step
- 1
You call and talk to a person. Our line is answered live 24/7, so you describe the problem to someone who knows gate systems, not a call center. We’ll ask about the brand, the symptoms, and whether the gate is stuck open or stuck closed.
- 2
We arrive and diagnose. The technician walks the full system: the gate, the operator, the sensors, the wiring, and the access control. We use a clamp meter, a multimeter, and the manufacturer’s diagnostic codes to find the root cause, and we test everything, not just the part that looks broken.
- 3
You get a written price. Before any work begins, you’ll see the full cost in writing: parts, labor, and any disposal. No verbal estimates, no “we’ll see how it goes.” If you don’t accept, we leave with no charge for the trip.
- 4
We repair it right. We replace the failed part, lubricate with pet-safe products where there’s a choice, and run the full cycle test the manufacturer specifies. Inside the house, we wear shoe covers and lay drop cloths, and we clean up as we go.
- 5
You see the proof. Before we leave, we photograph the cleanup and walk you through what was done. Every job is covered by the 365-Day Done Right Promise: if it’s not right, we make it right, no argument, no fine print.
How Much Does Electric Gate Repair Cost in Jacksonville?
A typical electric gate repair in Jacksonville runs between $150 and $600. Gate opener repairs, by far the most common, usually range from $180 to $450. A full motor replacement costs $400 to $1,200 depending on the gate’s weight, the motor type, and whether it’s swing or slide. Access control work ranges from $250 for a keypad up to $1,800 for a full telephone entry system. Commercial operator repairs start around $600 and go up from there.
| Repair Type | Typical Range in Jacksonville |
|---|---|
| Gate opener repair | $180 – $450 |
| Motor replacement (residential) | $400 – $1,200 |
| Access control repair/replacement | $250 – $1,800 |
| Commercial operator repair | $600 – $2,200 |
What affects the price most is the part, not the labor. A LiftMaster control board costs more than a capacitor, and a Viking telephone entry system costs more than a BFT keypad. Age matters too: units over ten years old sometimes lack replacement parts, and the repair becomes a replacement quote instead. Our free estimate includes the diagnostic, the written price, and our recommendation on whether to repair or replace. We never charge for the estimate, and we never start work until you’ve accepted the number in writing.
Our Service Area Near Jacksonville
Latch and Post Gate Repair Jacksonville works throughout Duval County and the surrounding areas. We regularly service Electric Gate Repair in Orange Park and Electric Gate Repair in Atlantic Beach, along with Fernandina Beach, Middleburg, St. Augustine, Green Cove Springs, Callahan, St. Johns, Jacksonville Beach, Neptune Beach, and Yulee. If your gate is stuck open or closed, call us and we’ll tell you honestly when we can be there. For a look at everything we do, start at our home page.
Serving Jacksonville, FL - Our Local Coverage Area
We’re based in the Jacksonville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Electric Gate Repair in Jacksonville
Electric gate repair is the diagnosis and fixing of any part of a motorized gate system: the operator, the motor, the control board, the safety sensors, the keypad, the remote receiver, and the wiring. We trace the problem to the exact failed component instead of replacing everything, which keeps your cost down. In Jacksonville, most repairs are completed the same day we arrive.
Most gate opener repairs finish in one to two hours. Motor replacements take two to four hours depending on the gate’s size and mounting. Access control and telephone entry work can take half a day, and commercial operator rebuilds may require a second visit if parts need to be ordered. We’ll give you a clear time estimate in writing before work starts.
Most residential repairs run between $150 and $600, with motor replacement at the higher end. You’ll know the exact cost before we start because we provide a written price on every visit. We never charge for the estimate, and we never begin work until you’ve approved the number.
Yes, we service LiftMaster gate openers regularly and stock common OEM control boards, remotes, and receiver parts. We also service FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your brand isn’t on that list, call us anyway; we’ll tell you honestly what we can do.
Our phones are answered live 24 hours a day, 7 days a week, and we make same-day service calls throughout Jacksonville during business hours. If your gate is stuck open and your kids or pets are on the property, call (904) 250-0188 and we’ll get someone dispatched as soon as we can. We’ll tell you the real timeline, not a sales pitch.
Every repair and installation at Latch and Post Gate Repair Jacksonville is covered by the 365-Day Done Right Promise. If the repair isn’t right within a year, we make it right, no argument and no fine print. Plus, your written price covers everything before work starts, so there are no added charges at the end.
Clear the area around the gate and the operator so we can access both sides. If your gate is inside a fence, make sure we can reach the control box and the keypad. For work inside the house, we put on shoe covers and lay drop cloths, and we’ll ask before we move anything, so you don’t need to empty the closet or move furniture.
Schedule Your Electric Gate Repair Service in Jacksonville Today
Your gate is stuck, your family is waiting, and you want a straight answer on price. Call Latch and Post Gate Repair Jacksonville at (904) 250-0188 for a free, no-obligation estimate. You’ll get a live person on the line, a written price before any work starts, and the Cedarwell C.A.R.E. routine on every visit. That’s the way we’ve done it since 2009, and it’s the way Cody Beckman runs every job in Jacksonville.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Jacksonville, serving Jacksonville since 2009.