Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHinge & Post Repair in Jacksonville, FL
A failing gate hinge or a leaning post is usually a gate repair, not a replacement. In Jacksonville, hinge and post repair typically runs between $180 and $650 depending on whether we’re replacing hardware, resetting a post in concrete, or refabricating a bracket for an oversized gate. Most jobs take one visit, and you’ll see the exact price in writing before we touch anything.
At Latch and Post Gate Repair Jacksonville, hinge and post work is the core of what we do. Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on. If your gate drags, sags, or won’t close squarely, call us at (904) 250-0188. We’re part of the broader Gate Repair in Jacksonville work we do across the city, and a live person answers every call, day or night.
When You Need Hinge & Post Repair
Most hinge and post failures announce themselves gradually, then suddenly. Here’s what we see in Jacksonville neighborhoods from San Marco to Mandarin to Oceanway:
- The gate scrapes the ground on the latch side. This usually means the hinge side post has shifted or the hinges have worn enough to drop the gate’s sweep. Left alone, the scrape gets worse and the motor (if you have one) starts working against itself.
- The gate won’t stay latched. If the latch no longer lines up with the receiver, it’s often a post that’s tilted a few degrees out of plumb, not a latch problem at all.
- The gate swings open or closed on its own. That’s a hinge alignment issue or a post that’s settled in soft soil. Jacksonville’s sandy soil and wet summers accelerate post settlement faster than homeowners expect.
- Visible rust or cracks at the hinge welds or bolt holes. Salt air near the Intracoastal and beaches eats at unprotected hardware. A hinge that looks rough on the outside is often worse where the bolts pass through.
- You have to lift the gate to open it. Hinges that bind or sag force you to muscle the gate every time. That’s not normal wear, it’s a failing part putting stress on the post.
- The post itself wobbles or leans. A gate post should be dead still. If yours moves when you shake it, don’t wait. A post that falls can take the gate, the opener, and whatever’s in its path with it.
If any of these sound familiar, we can usually get a technician out the same day. The fix is often faster than you’d think, especially when we catch the hinge before the post gives way.
Our Hinge & Post Repair Process
We follow the same care routine on every visit, whether we’re resetting a post in Avondale or replacing a pair of hinges on a farm gate near Baldwin. Here’s what to expect:
- We diagnose the gate and the post together. A hinge failure and a post failure look similar at first. Our technician measures the plumb of the post, checks hinge play by hand, and inspects how the gate sits in its closed position before recommending anything.
- We write the price down before we start. You get a written quote for the repair with parts and labor separated. No pressure, no “while we’re here” upsells. If you decide not to proceed, that’s fine.
- We protect the area around the gate. We lay drop cloths on your driveway, walkway, or entry floor and put on shoe covers before stepping inside. If we’re working near landscaping, we move carefully around plants and irrigation lines. We ask before we move or touch anything.
- We do the repair with the right hardware for the job. On FAAC and BFT automated gates we use hinges rated for the gate’s weight and cycle rate. On heavy steel driveway gates from brands like Linear and Viking, we often fabricate or source reinforced brackets rather than reusing worn originals. Where a post has heaved or settled, we excavate around it, reset it with fresh concrete, and true it before re-hanging the gate.
- We test, then clean, then show you our work. Before we leave, we cycle the gate through its full range of motion several times, check the latch alignment, and verify the auto-close function if the gate has one. Then we clean up. You get a photo of the cleared work area before we pull away. That’s our Cedarwell C.A.R.E. routine: clean up like it’s our own home, and explain the price before the work. It’s included on every visit.
Every hinge and post repair we complete is covered by our 365-Day Done Right Promise. If it isn’t right, we make it right. No fine print, no argument.
Hinge & Post Repair Pricing in Jacksonville
Here’s what you can expect to pay for common hinge and post repairs in the Jacksonville area. These are real ranges, not lowball teasers:
| Repair Type | Typical Range | What It Includes |
|---|---|---|
| Single hinge replacement (light gate) | $120 – $240 | Hinge, hardware, labor, alignment check |
| Paired hinge replacement (heavy gate) | $220 – $480 | Both hinges, reinforced mounting, alignment, testing |
| Post straightening / re-plumb | $180 – $380 | Excavation around post, re-truing, compaction |
| Post reset in new concrete | $300 – $650 | Remove old footing, set post, cure time, re-hang gate |
| Custom bracket or weld repair | $180 – $420 | Fabrication or reinforcement of hinge mount |
What moves the price: gate weight (a 16-foot steel driveway gate costs more to support than a 4-foot pedestrian gate), post condition, whether the gate is an automatic gate, and access (a gate close to the house is faster to work on than one at the back of a yard). Most standard hinge replacements run between $120 and $480, and you’ll see the exact number in writing before we start. Estimates are free, and there’s no obligation.
One more thing worth knowing: replacing a hinge early is almost always cheaper than replacing a post later. When a hinge wears, the gate drops, and that dropped gate starts leveraging against the post. Eventually the post loses. Catching hinge play before the post shifts can save you several hundred dollars.
FAQs – Hinge & Post Repair
How much does hinge and post repair cost in Jacksonville?
Most hinge and post repairs in Jacksonville run between $180 and $650. A simple single-hinge replacement starts around $120, while a full post reset in new concrete can reach $650. The exact price depends on gate weight, post condition, and whether the gate is automated. Call (904) 250-0188 for a free written estimate, no obligation.
Is it cheaper to repair a gate hinge or replace the whole gate?
Repairing a hinge is almost always cheaper than replacing the gate. A hinge replacement typically costs $120 to $480, while a new gate and opener installation usually starts above $1,200. If the gate itself is structurally sound and the post is still plumb, weld and rust repair or hinge repair is the clear financial call. We’ll tell you honestly if the gate is beyond saving.
Can you fix a leaning gate post without replacing it?
In many cases, yes. If the post is still structurally intact, we can excavate around it, re-plumb it, and compact the soil or add concrete to stabilize it. That work usually runs $180 to $380. If the post is rotted or the footing is cracked, a full reset with lock repair as needed is the better long-term fix. We’ll show you what we find before recommending either path.
How fast can you come out for a hinge or post repair in Jacksonville?
Most hinge and post repairs can be scheduled within 24 to 48 hours, and we do our best to offer same-day service when a gate won’t close. A live person answers our phone around the clock, so call (904) 250-0188 any time, and we’ll get you on the schedule.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Jacksonville, serving Jacksonville.