Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFAAC Access Control Installation: The Jacksonville Owner’s Guide
FAAC access control installation in Jacksonville typically runs between $1,800 and $4,500, depending on whether you’re adding a new keypad, phone-entry system, or full vehicle-detection loop, and most jobs are scheduled within a few days of your first call. The range is wide because FAAC systems stretch from simple standalone keypads to integrated entries that tie into existing gate operators, phone lines, and safety loops. You’ll notice it’s failed when the keypad beeps but the gate won’t move, or the phone-entry box rings but nobody can hear you through the speaker. Call us at (904) 250-0188 and we’ll talk through what the gate is doing before we send anyone out.
Key takeaways:
- We stock FAAC-compatible keypads, radio receivers, loop detectors, and phone-entry modules on the truck.
- Every job gets a written price before work begins, with no pressure to accept it.
- Our 365-Day Done Right Promise covers the full installation.
- We’re an independent Jacksonville gate specialist, not a FAAC dealer.
Which FAAC Models This Applies To
FAAC has two main residential lines you’ll find around Jacksonville: the 400 series swing-gate operators and the 390/412 series slide-gate operators. Many homes in San Marco and Ortega run a FAAC 402 or 415 swing operator, while larger lots off Hodges Boulevard and Mandarin often use the 844 slide operator. The access control side matters as much as the operator: a FAAC KP keypad is a different voltage than the XKP model, and wiring one where the other belongs can take out the receiver board. That’s a compatibility gotcha we’ve seen more times than we can count.
Here’s how to identify what you have: open the operator cover (power off first) and look for a silver data plate. FAAC stamps the model and serial number there. If the plate is gone, we can usually identify the unit by the control board layout and the arm or chain type. For keypads and phone-entry boxes, the model number is printed on the back of the housing. FAAC OEM parts are solid and worth the money when the board matters. For simpler items like antenna mounts, keypad bezels, and some radio receivers, a quality aftermarket equivalent from a supplier like LiftMaster or Linear often performs identically for 30 to 40 percent less. We’ll tell you which is which before you spend anything.
Styles & brands we work with
Signs Your FAAC Access Control Installation Is Failing
- Keypad accepts the code but the gate won’t open. This usually means the relay on the keypad or receiver has burned out. The keypad thinks it’s working, which is why the display still lights up, but the signal never reaches the operator board.
- Phone-entry rings but the audio is garbled. Jacksonville humidity gets into the microphone and speaker connections over time. Corrosion on the terminals causes exactly this symptom, and it often presents after a heavy rain season.
- The gate opens randomly without anyone entering a code. This points to a failing loop detector or a radio receiver picking up stray signals. FAAC loop detectors in particular are sensitive to standing water, which is common in Jacksonville yards after summer storms.
- One specific code stops working while others still function. This is typically a worn key on the keypad membrane, not a board failure. The fix can be as simple as replacing the membrane, which costs far less than a new keypad.
- The access control unit works but the gate reverses immediately after opening. Your safety loop or photoelectric edge is reading a false obstruction. It’s not the access control itself, but the symptom shows up at the same point in the cycle.
Replacement Cost & What’s Included
Here’s what FAAC access control installation costs in Jacksonville right now:
- Single keypad replacement: $280 to $520, including the keypad, wiring checks, and programming.
- Phone-entry system installation: $900 to $1,800, depending on whether you need a new SIM card module or landline integration.
- Full access control retrofit with loop detector and two keypads: $2,200 to $4,500.
- Radio receiver replacement and remote programming: $180 to $350 if the receiver is the only failing component.
Every quote is itemized: the part, the labor, and the programming time are listed separately so you can see exactly what you’re paying for. We charge the same rate whether you’re in Riverside or out past Baymeadows, and the written price we hand you before we start is the price you pay. No surprises, no “we found something else” add-ons. The installation is covered by our 365-Day Done Right Promise: if the access control doesn’t work right, we come back and make it right.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Access control wiring is low-voltage, so it’s not the same shock hazard as working inside a live operator cabinet. That said, the operator itself carries line voltage, and a wrong wire placement on a FAAC control board can fry a $400 board in one second. If you’re comfortable checking that the keypad has power and that the code still works from the keypad itself, those are safe diagnostic steps. Beyond that, we’d rather you call us. Cody Beckman has spent years on FAAC-specific diagnostics, and he’s the first to say a gate that’s been “adjusted” by three people takes twice as long to diagnose as one nobody has touched. Tell us exactly what the gate is doing, and we can usually figure out what it needs before we even open the panel. Call (904) 250-0188 and we’ll talk it through at no charge.
FAQs
Most FAAC access control components last 7 to 12 years in Jacksonville’s climate, but the salt air near the Intracoastal and the humidity everywhere else in town shortens that for anything mounted without a weather hood. Keypads and phone modules that sit in direct afternoon sun tend to fail at the 7-year mark because the membrane and speaker gaskets harden and crack. If you’re near San Marco or Avondale, expect the shorter end of that range and budget accordingly.
Often yes, and we’ll always check that path first. A keypad with a single dead key usually just needs a new membrane, and a phone-entry module with audio trouble often just needs the corroded terminals cleaned and resealed. We don’t replace parts that still have useful life in them, and that habit frequently keeps a bill near $150 instead of $400. Call (904) 250-0188 and we’ll tell you straight which way it goes for your specific unit.
A keypad or receiver swap usually takes 45 minutes to an hour on site, including programming and testing. A full phone-entry installation with a new module and wiring typically runs two to three hours. We’ll give you an exact time window when we schedule, and we’ll show up when we say we will.
We stock the most commonly needed FAAC-compatible parts on our trucks: KP and XKP keypads, radio receivers, loop detectors, and standard phone-entry modules. Specialty items like the FAAC 455D control board or a specific solar kit may need to be ordered, which usually adds two to three business days. We’ll tell you before we schedule so there are no surprises, and the written price covers the part whether it comes from our truck or our supplier.
Why Jacksonville Homeowners Call Latch and Post Gate Repair
Latch and Post Gate Repair is part of the Cedarwell family and has been operating since 2009 as an independent Jacksonville gate specialist. We’re not a FAAC dealer, and we don’t have a sales quota to hit. What we do have is a crew of background-checked, uniformed technicians factory-trained on FAAC, LiftMaster, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. Every visit follows the Cedarwell C.A.R.E. values: we put on shoe covers and lay drop cloths before stepping inside your home, we ask before we move or touch anything, we respect quiet hours when kids are napping, and we explain the price before the work. Before we leave, you’ll get a photo of the clean-up. If anything isn’t right within 365 days, we make it right. No argument, no fine print.
Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on, and it’s why Cody Beckman and the crew treat your access control installation as more than a part swap. It’s the point where your family’s daily routine meets the gate. When it works, you don’t think about it. When it doesn’t, you want it fixed by someone who knows exactly which FAAC model you have and what it needs. That’s us. Call (904) 250-0188 for a free estimate today. A live person answers, day or night.
Written by Cody Beckman, Owner, Latch and Post Gate Repair Jacksonville at Latch and Post Gate Repair Jacksonville, serving Jacksonville and nearby areas.